原创 单片机与蜂鸣器

2009-6-15 17:32 1281 0 分类: MCU/ 嵌入式

#include "reg52.h"
unsigned char Count;
sbit _Speak =P2^3 ;   //讯响器控制脚 


unsigned char code SONG[] ={      //祝你平安
0x26,0x20,0x20,0x20,0x20,0x20,0x26,0x10,0x20,0x10,0x20,0x80,0x26,0x20,0x30,0x20,
0x30,0x20,0x39,0x10,0x30,0x10,0x30,0x80,0x26,0x20,0x20,0x20,0x20,0x20,0x1c,0x20,
0x20,0x80,0x2b,0x20,0x26,0x20,0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x80,0x26,0x20,
0x30,0x20,0x30,0x20,0x39,0x10,0x26,0x10,0x26,0x60,0x40,0x10,0x39,0x10,0x26,0x20,
0x30,0x20,0x30,0x20,0x39,0x10,0x26,0x10,0x26,0x80,0x26,0x20,0x2b,0x10,0x2b,0x10,
0x2b,0x20,0x30,0x10,0x39,0x10,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x20,
0x20,0x10,0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x18,0x20,0x18,0x20,0x26,0x20,
0x20,0x20,0x20,0x40,0x26,0x20,0x2b,0x20,0x30,0x20,0x30,0x20,0x1c,0x20,0x20,0x20,
0x20,0x80,0x1c,0x20,0x1c,0x20,0x1c,0x20,0x30,0x20,0x30,0x60,0x39,0x10,0x30,0x10,
0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x10,0x26,0x10,0x26,0x10,0x2b,0x10,0x2b,0x80,
0x18,0x20,0x18,0x20,0x26,0x20,0x20,0x20,0x20,0x60,0x26,0x10,0x2b,0x20,0x30,0x20,
0x30,0x20,0x1c,0x20,0x20,0x20,0x20,0x80,0x26,0x20,0x30,0x10,0x30,0x10,0x30,0x20,
0x39,0x20,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x10,0x40,0x10,0x20,0x10,
0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x00,
                                  //路边的野华不要采
0x30,0x1C,0x10,0x20,0x40,0x1C,0x10,0x18,0x10,0x20,0x10,0x1C,0x10,0x18,0x40,0x1C,
0x20,0x20,0x20,0x1C,0x20,0x18,0x20,0x20,0x80,0xFF,0x20,0x30,0x1C,0x10,0x18,0x20,
0x15,0x20,0x1C,0x20,0x20,0x20,0x26,0x40,0x20,0x20,0x2B,0x20,0x26,0x20,0x20,0x20,
0x30,0x80,0xFF,0x20,0x20,0x1C,0x10,0x18,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,
0x20,0x2B,0x40,0x20,0x20,0x1C,0x10,0x18,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,
0x20,0x2B,0x40,0x20,0x30,0x1C,0x10,0x18,0x20,0x15,0x20,0x1C,0x20,0x20,0x20,0x26,
0x40,0x20,0x20,0x2B,0x20,0x26,0x20,0x20,0x20,0x30,0x80,0x20,0x30,0x1C,0x10,0x20,
0x10,0x1C,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,0x15,0x1F,
0x05,0x20,0x10,0x1C,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,
0x30,0x1C,0x10,0x18,0x20,0x15,0x20,0x1C,0x20,0x20,0x20,0x26,0x40,0x20,0x20,0x2B,
0x20,0x26,0x20,0x20,0x20,0x30,0x30,0x20,0x30,0x1C,0x10,0x18,0x40,0x1C,0x20,0x20,
0x20,0x26,0x40,0x13,0x60,0x18,0x20,0x15,0x40,0x13,0x40,0x18,0x80,0x00,


};


void Time0_Init()
{
 TMOD = 0x01;
 IE   = 0x82;
 TH0  = 0xD8;
 TL0  = 0xEF;  //12MZ晶振,10ms
}


void Time0_Int() interrupt 1
{
 TH0 = 0xD8;
 TL0 = 0xEF;
 Count++;   //长度加1
}


/*-------------------------------------------------
功能:1MS延时子程序
-------------------------------------------------*/
void Delay_xMs(unsigned int x)
{
    unsigned int i,j;
    for( i =0;i < x;i++ )
    {
        for( j =0;j<3;j++ );
    }
}


/*-------------------------------------------------
功能:歌曲播放子程序i为播放哪一段曲目
-------------------------------------------------*/
void Play_Song(unsigned char i)
{
 unsigned char Temp1,Temp2;
 unsigned int Addr;
 Count = 0;      //中断计数器清0
 Addr = i * 217;
 while(1)
 {
  Temp1 = SONG[Addr++];
     if ( Temp1 == 0xFF )          //休止符
     {
      TR0 = 0;
      Delay_xMs(100);
     }
     else if ( Temp1 == 0x00 )   //歌曲结束符
     {
      return;
     }
     else
     {
      Temp2 = SONG[Addr++];
      TR0 = 1;
     while(1)
     {
       _Speak = ~_Speak;
       Delay_xMs(Temp1);
       if ( Temp2 == Count )
       {
        Count = 0;
        break;
       }
      }
     }
 }
}
/*-------------------------------------------------
功能:主程序
-------------------------------------------------*/
void main()
{
 Time0_Init();   //定时器0中断初始化
 while(1)
 {
  Play_Song(0);  //播放
 }
}


 

广告

文章评论 0条评论)

登录后参与讨论
相关推荐阅读
yqh815 2009-06-15 18:17
采用定时器0产生多个时间间隔(转展)
采用单片机定时器0产生多个时间间隔。程序中使用定时器0每50ms中断一次,然后用全局变量tt,t1,t2,t3,t4,t5对中断次数计数,获得100ms,1s,2s,4s,8s,16s间隔,在各个定时...
我要评论
0
0
广告
关闭 热点推荐上一条 /1 下一条