广告

AD公司的数字温度传感器

2009-4-28 15:11 1406 0 分类: EDA/ IP/ 设计与制造

acb4c8d2-2503-4c10-a199-7c8f254e7c4b.jpg


Part 分辨率 误差 位数 通道 Interface Temp Range(s) Supply Voltage Range Price* (1000-4999)
AD7818 0.25 ±1 10 1 Serial, SPI, Switch (Off/On) -40 to +85 +2.7V to +5.5V $2.10
TMP03 0.3 ±3 16 0 PWM -40 to +100 +4.5V to +7V $2.94
AD7418 0.25 ±1 10 1 I2C, Serial -40 to +125 +2.7V to +5.5V $2.10
AD7814 0.25 ±2 10 0 Serial, SPI -55 to +125 +2.7V to +5.5V $0.90
AD7817 0.25 ±1 10 4 Serial, SPI, Switch (Off/On) -40 to +85 +2.7V to +5.5V $2.95
AD7415 0.25 ±2 10 0 I2C, Serial -40 to +125 +2.7V to +5.5V $0.94
AD7417 0.25 ±2 10 4 I2C, Serial -40 to +125 +2.7V to +5.5V $2.68
AD7816 0.25 ±1 10 0 Serial, SPI -40 to +85 +2.7V to +5.5V $1.14
        
AD7414 0.25 ±2 10 0 I2C -40 to +125 +2.7V to +5.5V $0.94
AD7416 0.25 ±2 10 0 I2C, Serial -40 to +125 +2.7V to +5.5V $0.90
AD7314 0.25 ±1 10 0 Serial, SPI -35 to +85 +2.65V to +5.5V $0.59
ADT7301 0.03125 - 13 0 SPI -55 to +150 +2.7V to +5.5V **
ADT7302 0.03125 - 13 0 Serial, SPI -40 to +125 +2.7V to +5.5V **
TMP04 0.3 ±3 16 0 PWM -40 to +100 +4.5V to +7V $2.94
TMP06 0.025 ±0.5 12 0 PWM -40 to +150 +2.7V to +5.5V $0.95
TMP05 0.025 ±0.5 12 0 PWM -40 to +150 +2.7V to +5.5V $0.95
ADT75 0.0625 ±1 12   ?55°C to +125°C 3 V to 5.5 V

广告

文章评论 0条评论)

登录后参与讨论
相关推荐阅读
vivi_764430446 2009-04-28 16:17
石油测井耐温元器件
 ...
vivi_764430446 2009-04-28 16:15
供应世界各国知名品牌军工级IC
OP42AZ/883C ADI 500 6OP42AZ/883C AD 32 0612+OP42AZ/883C AD 24 0612+OP42AZ/883C AD 58 525OP42AZ/883C ...
vivi_764430446 2009-04-28 16:12
AD芯片描述
AD586JN 精密 5V电压基准源(民用级)DIPAD586JQ 精密 5V电压基准源(民用级)DIPAD586KN 精密 5V电压基准源(民用级)DIPAD586KQ 精密 5V电压基准源(民用级...
vivi_764430446 2009-04-28 16:09
军工级ATMEL 芯片资料简介
FPGAs设备描述AT40KALFPGA with FreeRAM. AT40KAL FPGA with FreeRAM (Fast Carry) with Dynamic Reconfigurati...
vivi_764430446 2009-04-28 16:06
电压基准源TL431 典型应用电路
电压基准源TL431 典型应用电路TL431精密可调基准电源有如下特点:稳压值从2.5~36V连续可调;参考电压原误差+-1.0%,低动态输出电阻,典型值为0.22欧姆输出电流1.0~100毫安;全温...
vivi_764430446 2009-04-28 16:04
关于加长usb通信线的问题
刚买的一个usb扩展口四个的。线短了点,想加长一下,真好手头一个没用的数据线就加长了,可就是无法识别,不能通信,在网上找了找原来原因是:1.线太长了.供电不足.2.加长线和U盘那边的接口松了3.线可能...
我要评论
0
0
广告